Upgrade Instructions

Step 1

Install New Update

Launch the Cama Cooler App, tap the Updates tab (Or Advanced tab) and select Update Firmware
While your Cama Cooler is downloading and installing the new software, the fan will run at 100% until the updates are finished.
Once the update is complete, your Cama Cooler will be waiting for you to join it to your home WiFi

Step 2

Join your WiFi Network

Tap the menu icon (3 horizontal lines) in the top right corner of the app.
Tap the configure icon and follow the prompts to join the Cama Cooler back to your home WiFi network.
If the process fails, make sure you are connected to the "Cama Cooler" WiFi network while running through the steps. If it does not complete, try unpluggin the unit for about 10 seconds before powering it up and trying the process again.

New Features

You will need to finish configuring the Cama Cooler by going through the tabs and putting in your preferences.

Control Tab

This screen allows you to manually control your Cama Cooler anytime. If you are currently running the schedule, it will temporarily interrupt the schedule with what you select here.

Start Button

Select the time and mode you want to run, and press Start.

Stop Button

Pressing the Stop button will stop the fan and resume the schedule mode.

Start Schedule Now Button

This is for people who go to bed at different times each night. Press this button to begin running the schedule immediatly, otherwise the shchedule will run according to the time you choose on the Schedule tab.

Schedule Tab

This screen allows you setup a custom schedule for your personal needs. It runs chronologically from the top down. You can choose the time and fan mode for different stages of your sleep schedule. It may take a few nights to figure out what works best for you.

Start Time

Tap the time at the top of the screen, shown in Hours:Minutes:Seconds AM/PM. This determines what time the schedule will begin running automatically each night.

Chronological Schedule

Choose the duration of each stage of the night. The schedule shown here would go as follows
11:00 PM - 11:30 PM on High
11:30 PM - 2:30 AM on Low
3:30 AM - 4:30 AM on Medium
4:30 AM - 5:30 AM Off
5:30 AM - 7:30 AM on Breathe Mode
7:30 AM - 7:40 AM on High
You may need to experiment to find out what works best. You can use any number of time slots you want. We have included 6 for as much flexibility as possible.

Settings Tab

This screen allows you to fine tune the settings for the fan speeds, as well as the fan speed and on/off times for the Breathe Mode

Speed Settings

This allows you to fine tune the fan speed for each mode.

Breathe Settings

During Breathe mode, the Cama Cooler will alternate between running and resting, this prevents overcooling during colder seasons.
The numbers for Rest Time and Run time are in Minutes

Updates Tab

Current Version

This shows the software version that is installed on your Cama Cooler. If it shows 3.100 then you have correctly updated your Cama Cooler. If it shows anything else, you will need to tap Update Firmware and run through Steps 1 & 2 again.

Seamless Updates

Future updates will not require you to re join your Cama Cooler to your home WiFi network, as the new software is capeable of remembering the WiFi passwords during future software updates.

All Content © 2020 Cama Cooler. All Rights Reserved.

Have a good night :)